Plastochem’s high-quality UPVC solvent cement

 

PLASTOCHEM

1️⃣ Why might UPVC pipes not stick properly after applying solvent cement?

A) The pipes are too new
B) The surfaces were dirty, greasy, wet, or uneven
C) The cement was applied perfectly evenly

✅ Correct Answer: B
Dirty, greasy, wet, or uneven surfaces prevent proper bonding. Always clean and prepare with a primer, then apply cement evenly.

2️⃣ What’s the best way to ensure pipes bond well?

A) Skip cleaning to save time
B) Use a primer and clean surfaces before applying cement
C) Apply cement only on one side

✅ Correct Answer: B
Always clean the surfaces and use a primer. Apply cement evenly on both pipe and fitting.

3️⃣ Why do leaks at the joint often occur?

A) Cement was not given enough time to dry
B) Pipes were loosely fitted or twisted improperly
C) Pipe and fitting sizes didn’t match
D) All of the above

✅ Correct Answer: D
Leaks usually come from insufficient curing time, loose connections, or mismatched sizes.

4️⃣ How long should you let UPVC solvent cement set before testing with water?

A) 5 minutes
B) 15-20 minutes
C) Immediately after joining

✅ Correct Answer: B
Wait at least 15-20 minutes before applying any water pressure.

5️⃣ What causes solvent cement to dry too quickly?

A) Cold weather
B) Exposure to air or hot temperatures
C) Using expired cement

✅ Correct Answer: B
Excessive exposure to air and heat causes the cement to harden before application.

6️⃣ How can you prevent the cement from drying too fast?

A) Leave the lid off the container
B) Work quickly and in small sections
C) Always apply under direct sunlight

✅ Correct Answer: B
Keep the container closed when not in use and work quickly in shaded or cool areas.

7️⃣ What leads to excess cement on the outside of the joint?

A) Using too little cement
B) Not wiping off excess right after joining
C) Applying too much cement

✅ Correct Answer: B and C
Apply only a thin layer of cement and immediately wipe off any excess with a clean cloth.

8️⃣ How long should you hold pipes together after applying cement to ensure a strong joint?

A) 5 seconds
B) 30 seconds
C) Not necessary to hold

✅ Correct Answer: B
Hold firmly for at least 30 seconds to allow the bond to set.

9️⃣ What’s important to check on your UPVC solvent cement before using it?

A) Color of the container
B) Expiry date
C) Brand logo

✅ Correct Answer: B
Expired cement may lose adhesive strength, leading to weak joints.

✅ Final Tip from Plastochem

By knowing these answers, you’re on your way to leak-proof, long-lasting UPVC installations. Always trust Plastochem’s high-quality UPVC solvent cement for secure, professional results.